User Tools

Site Tools


casque_epoc_-_connection_eeg

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
casque_epoc_-_connection_eeg [2017/10/16 14:56]
romain
casque_epoc_-_connection_eeg [2017/10/16 15:42] (current)
romain
Line 1: Line 1:
 ====== Installation emotiv epoc ====== ====== Installation emotiv epoc ======
  
-<​code>​sudo apt-get install libhidapi-dev ​libhidapi-dev libusb-1.0-0-dev</​code>​ +<​code>​sudo apt-get install ​cmake libhidapi-dev ​libmcrypt-dev libusb-1.0-0-dev ​liboscpack-dev python-pip</​code>​ 
-<​code>​pip install emokit</​code>​ + 
-<​code>​wget https://​github.com/​agermanidis/emokit.git</​code>​+<​code>​wget https://​github.com/​NF6X/​pyhidapi/​archive/​master.zip</​code>​ 
 +<​code>​unzip master.zip</​code>​ 
 +<​code>​cd pyhidapi-master/</​code>​ 
 +<​code>​./​setup.py install --user 
 +sudo ./setup.py install 
 +sudo ./setup.py install --prefix /​usr/​local 
 +./setup.py sdist</​code>​ 
 + 
 +<​code>​sudo pip install emokit</​code>​ 
 +<​code>​wget https://​github.com/​Raymax/emokit/​archive/​master.zip</​code>​
 <​code>​unzip emokit-master.zip</​code>​ <​code>​unzip emokit-master.zip</​code>​
 <​code>​cd /​yourpathto/​emokit-master/​c/</​code>​ <​code>​cd /​yourpathto/​emokit-master/​c/</​code>​
 +<​code>​cmake .</​code>​
 +<​code>​make</​code>​
 +
  
 +Puis on lance le transmetteur osc avec :
 +<​code>​./​emokit_osc consumer 127.0.0.1 9997</​code>​
  
 +Où 127.0.0.1 et 9997 sont respectivement l'ip et le port que l'on peut changer
  
casque_epoc_-_connection_eeg.1508158566.txt.gz · Last modified: 2017/10/16 14:56 by romain